LUMINO INDUSTRIES
 AAC/AAAC/ACSR Conductors
HOME >>> Lumino Products :: Profile :: Contact Us :: Quality ::  Clients Laser Cables

LUMINO INDUSTRIES QUALITY ASSURANCE PROGRAMME

To ensure that the conductors are in accordance with the specifications, we adopt the following suitable quality assurance programme.

1. Organization
Organization is setup to manufacture and test our products through modern method from raw material selection, processing, finishing, testing to packing, conforming to the stringent relevant standard.

2. Qualification data of key personnel
We have well experienced personnel both technical and commercial to look after our organizational activities.
:: Tapas Debnath               B.Sc. (Manager Technical)
:: Rakesh Jhunjhunwala     (Manager Administration)
:: Dinesh Dalmia                B.Com (Accountant)
:: Surinder Rout                  B.Sc. (Quality Controller)
:: Hemkant Jha                   (Supervisor)
:: Bhupinder Sahi                (Supervisor)
:: Naresh Poddar                (Supervisor)		 PROCESS FLOW CHART OF AAC/ AAAC/ ACSR CONDUCTORS, Click on the test numbers for details
PROCESS FLOW CHART OF AAC/ AAAC/ ACSR CONDUCTORS
TEST 1
1. Test for Tensile Strength
2. Test for Diameter
3. Test for Elongation

3. Procedure for purchase of raw material
We purchase raw materials from primary producers to
ensure the quality of materials
:: The raw materials are stacked in the storage godowns
and checks are conducted for chemical and physical
properties with comparison to the test certificates issued
by the supplier. Only lots passing the checks are accepted.
:: The raw material is sent for processing and stage wise manufacture and testing.

4:Calibration Test
Calibration test on testing equipments are done time to time to ensure correctness of finished products.

5. Quality Audit
Our products bear the ISI mark and the products of different sizes are tested by different Government/ Semi Government organizations officers/ Engineers and other recognized testing laboratory as per relevant Indian Standard. Our complete range of products are subjected to a full series of routine/ acceptance tests as per relevant Indian Standard such as
:: Visual examination
:: Dimensional verification
:: Breaking load test (UTS)
:: Resistance
:: Elongation
:: Lay Ratio

6. Authorizing release of manufactured product to the purchaser
After internal test of our product, we call for inspection the purchaser who further conduct the necessary inspection and tests at our works as per their requirement. After inspection the product is packed in wooden drums and the drums are gripped with hoop iron under tension, to ensure that the inspected material are received by the purchaser in good and intact condition.

TEST 2
1. Dia of wire
2. Resistance Test
3. Visual Examination
4. Breaking Load Test
5. Wrapping Test

TEST 3
1. Dia of wire
2. Lay Ratio
3. Wrapping Test
4. Mass of Zinc Coating
5. Test for Elongation
6. Breaking Load Test
7. Uniformity of Wire Coating

TEST 4
1. Lay Ratio
2. Overall Diameter

TEST 5
1. Test for Lay Ratio
2. Dia of wire
3. Resistance Test of Aluminium Wire
4. Wrapping Test
5. Breaking Load Test
6. Test for Elongation
7. Mass of Zinc Coating
8. Uniformity of Wire Coating
Laser Power and Control Cables   :::::   Lumino AAC/ACSR/AAAC Conductors
Home :: Price List :: Site Map